250 CIIMobile Boat Hoist

The 250 CII boat hoist is ideal for yards with special requirements. Its forward top beam will allow it to easily handle vessels with large upper structures. Please contact your local dealer for more information and to find out if the 250 CII is the right hoist for your yard.

250 CII 550,000 lbs. / 250,000 kg

Select Model 150 CII 200 CII 250 CII 300 CII 400 C 400 TG 500 C 550 C

Overview Features Options Videos Photos Brochure

CAPACITY
250 metric tons

550,000 lbs. / 250,000 kg

Details:

Yachts up to approx. 130 ft. (39 m) long
Uses a 6-hoist configuration and 4-ply sling system
Ideal for the needs of commercial yards

View larger

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

View Features:

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.
Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.
Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.
Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.
Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.
Steel Structure

Reduces fatigue and extends the life of your machine with a beam formed structure. It gives the boat hoist more strength for more heavy-duty work year after year.
Bolting Flange

Provides greater versatility with easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.
Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities, to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius and helps get every boat exactly where it needs to be, easily and efficiently.
Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.
Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.
Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.
Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.
Cordura Covers

Protect hoses from harsh elements, damaging UV rays and abrasions for longer service life.
Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.
PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane top coat provides superior performance for use in a wide variety of difficult marine environments.

Previous Feature Next Feature

View larger

Customizable Height & Width

Marine Travelift boat hoists are available in custom heights and widths to meet the specific requirements of your yard.

View Options:

Customizable Height & Width

Marine Travelift boat hoists are available in custom heights and widths to meet the specific requirements of your yard.
Wireless Remote Control

Improve operational safety and maneuverability. The wireless remote control increases visibility of the boat, launching piers and surrounding area.
All Wheel Electronic Steering

Maximize your machine’s versatility, maneuverability and precision in confined boat yard spaces with our patented all wheel steering technology. The system includes 5 steering modes with more drive and turning speed.
Sound Suppression I

Reduce engine noise with a Level I Sound Suppression Kit, which incorporates foam lining on the inside of the engine compartment.
Sound Supression II

Eliminate the need to raise your voice on the job. The Level II Sound Suppression Kit sets the industry standard in noise reduction – including foam lining, louvers and a hospital-grade muffler. It’s ideal for yards using additional equipment and helps meet the requirements of local noise restrictions.
European Package (CE Certification)

Provides full CE compliance for our valued customers in the European Union.
Change in Block Drop (below pier level)

Accommodate tidal fluctuations by adjusting the wire rope length on the hoist drum. This allows you to launch vessels at any tide level.
Electronic Load Indicator

Receive an electronic readout of vessels’ weights. An electronic load indicator can also be integrated into the wireless remote control as an additional upgrade.
AVT Program

Automatic Variable Throttle (AVT) adjusts engine speed automatically to reduce fuel consumption and increase component life. Its built-in programming automatically draws only the power you need to complete the task at hand.
2-Speed Hoist

Increase lifting speed for more efficiency when your machine is in high demand and in great fluctuating tides.
2-Speed Drive

Increase travel speed and reduce time between loading and storage points.
Increased Gradeability

Maximize efficiency and yard space with additional drive motors that allow your boat hoist to travel over inclined, uneven or sloped surfaces. Increased gradeability is recommended for yards with non-concrete or asphalt surfaces.
Work & Drive Lights

High-mounted and/or low-mounted 12-volt DC lights illuminate work and drive areas and run off the crane’s electrical system. Custom configurations are available.
Zinc-Enriched Primer

Prolong your boat hoist’s paint life in highly corrosive environments with our zinc-enriched primer.
Extra Fuel Tank

Marine Travelift boat hoists’ lower side beam can be converted to accommodate more fuel capacity. This option is designed for yards that run long shifts, have limited fuel accessibility or operate in hurricane-prone regions.
Customized Spreader Bars

When you need more variable distribution or to separate slings to clear a hull appendage, customized spreader bars are available to solve the most challenging lifting requirements.
Longer Spreader Bars

When you need more load distribution or to separate slings to clear a hull appendage, longer spreader bars create greater distance between slings. Longer spreader bars also allow for additional sling sets.
Additional Bolting Flange

Easily increase or narrow the width of your machine in the future. This second set of flanges is added to the top beam (cross beam), creating a removable spool piece (spacer) between bolting flanges.
Enclosed Cab

Ensure maximum operator comfort (particularly in colder climates) with a lockable door, sliding windows, windshield wiper, heater and window defrosting fan. Optional air-conditioning is also available for the enclosed cab
Custom Colors

All Marine Travelift machines can be painted with a custom color.
Cold Start Kit

Marine Travelift offers a Cold Start Kit for our mobile boat hoists to assist in the warm-up procedure in cold environments. An Arctic Operation Package (-25°C to -40°C) is available for extreme cold conditions.
Additional Slings

Add more sling sets to your boat hoist and handle more diverse vessels. Customization of sling lengths and options are available.