75 BFMIIMobile Boat Hoist

Lift the boats you need to lift day in and day out with confidence. The 75 BFMII mobile boat hoist is ideal for salt-water marinas and available with a wide variety of options to ensure you get the right machine to meet the demands of your yard.

75 BFMII 165,000 lbs. / 75,000 kg

Select Model 15 BFMII 25 BFMII 35 BFMII 50 BFMII 75 BFMII 85 BFMII 100 BFMII

Overview Features Options Videos Photos Brochure

CAPACITY
75 metric tons

165,000 lbs. / 75,000 kg

Details:

Powerboats, sailboats, tugs, fishing boats and patrol boats approx. 80 ft. (24 m) long
Available in custom widths and heights to handle catamarans, barges and deep keel racing sailboats

View larger

Remote Diagnostic Abilities

The new Bluetooth adapter allows for convenient remote diagnostic communication with the intelligent system through smartphones, tablets, and computers upon operator access.

View Features:

Remote Diagnostic Abilities

The new Bluetooth adapter allows for convenient remote diagnostic communication with the intelligent system through smartphones, tablets, and computers upon operator access.
Intelligent Load Readout System

This separate intelligent system allows for multiple outputs including general engine performance, real time measurements of general machine operations, performance trouble shooting, and complete systematic control.
Industrial Tires

Get the highest level of durability with new industrial tires.
Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.
PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane top coat provides superior performance for use in a wide variety of difficult marine environments.
Cab Control Direct to Valve

Separate from the innovative electrical readouts, the time tested mechanical controls will have complete function at all times when needed.
Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.
Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities, to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius and helps get every boat exactly where it needs to be, easily and efficiently.
Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beam formed structure. It gives the boat hoist more strength for more heavy-duty work year after year.
Slew Bearing

Redesigned and now standard, this is a rotational rolling element bearing supports a heavy, but slow turning load. Grease points are easily accessible through side ports and contained within the sealed bearing surface.
Bolting Flange In Top Beam

Provides greater versatility with easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.
Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.
Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.
Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.
Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.
2 Speed Drive

Increase travel speed and reduce time between loading and storage points.
Cordura Covers

Protect hoses from harsh elements, damaging UV rays and abrasions for longer service life.
Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.
Modified Wheel Frame

Reinforced bottom flat plate that allows for a stable surface if jacking is needed. There is also more space inside of the wheel hub for increased visibility of the hydraulic motor for easier maintenance access.
Maintenance Access

Increased engine compartment size.

Hydraulic tank removable, corrosion resistant access plate that allows for easier points of access when routine maintenance is needed.
Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Previous Feature Next Feature

View larger

Customizable Height & Width

Marine Travelift boat hoists are available in custom heights and widths to meet the specific requirements of your yard.

View Options:

Customizable Height & Width

Marine Travelift boat hoists are available in custom heights and widths to meet the specific requirements of your yard.
Wireless Remote Control

Improve operational safety and maneuverability. The wireless remote control increases visibility of the boat, launching piers and surrounding area.
Top Beam Extension

Lift sailboats, motor yachts and sport fishing vessels in less time and with greater efficiency. Top beam extensions provide additional clearance without needing to adjust the vessel’s rigging.
All Wheel Electronic Steering

Maximize your machine’s versatility, maneuverability and precision in confined boat yard spaces with our patented all wheel steering technology. The system includes 5 steering modes with more drive and turning speed.
Sound Suppression I

Reduce engine noise with a Level I Sound Suppression Kit, which incorporates foam lining on the inside of the engine compartment.
Sound Suppression II

Eliminate the need to raise your voice on the job. The Level II Sound Suppression Kit sets the industry standard in noise reduction – including foam lining, louvers and a hospital-grade muffler. It’s ideal for yards using additional equipment and helps meet the requirements of local noise restrictions.
European Package (CE Certification)

Provides full CE compliance for our valued customers in the European Union.
Change In Block Drop (below pier level)

Accommodate tidal fluctuations by adjusting the wire rope length on the hoist drum. This allows you to launch vessels at any tide level.
Electronic Load Indicator

Receive an electronic readout of vessels’ weights. An electronic load indicator can also be integrated into the wireless remote control as an additional upgrade.
AVT Program

Automatic Variable Throttle (AVT) adjusts engine speed automatically to reduce fuel consumption and increase component life. Its built-in programming automatically draws only the power you need to complete the task at hand.
2-Speed Hoist

Increase lifting speed for more efficiency when your machine is in high demand and in great fluctuating tides.
Increased Gradeability

Maximize efficiency and yard space with additional drive motors that allow your boat hoist to travel over inclined, uneven or sloped surfaces.
Work & Drive Lights

High-mounted and/or low-mounted 12-volt DC lights illuminate work and drive areas and run off the crane’s electrical system. Custom configurations are available.
Zinc-Enriched Primer

Prolong your boat hoist’s paint life in highly corrosive environments with our zinc-enriched primer.
Extra Fuel Tank

Marine Travelift boat hoists’ lower side beam can be converted to accommodate more fuel capacity. This option is designed for yards that run long shifts, have limited fuel accessibility or operate in hurricane-prone regions.
Longer Spreader Bars

When you need more load distribution or to separate slings to clear a hull appendage, longer spreader bars create greater distance between slings. Longer spreader bars also allow for additional sling sets.
Jib Crane

Move loads on or off a vessel while it’s in the slings. Each telescopic-powered crane is controlled separately and mounted to the upper structure of the boat hoist.
Additional Bolting Flange

Easily increase or narrow the width of your machine in the future. This second set of flanges is added to the top beam (cross beam), creating a removable spool piece (spacer) between bolting flanges.
Enclosed Cab

Ensure maximum operator comfort (particularly in colder climates) with a lockable door, sliding windows, windshield wiper, heater and window defrosting fan. Optional air-conditioning is also available for the enclosed cab.
Custom Colors

All Marine Travelift machines can be painted with a custom color.
Cold Start Kit

Marine Travelift offers a Cold Start Kit for our mobile boat hoists to assist in the warm-up procedure in cold environments. An Arctic Operation Package (-25°C to -40°C) is available for extreme cold conditions.
Additional Slings

Add more sling sets to your boat hoist and handle more diverse vessels. Customization of sling lengths and options are available.